Another unique creation to our hoods and inflatables collection is d.vote's 80's 'Punk Style' funky, freaky and very pervy Inflatable Mohawk Hood.

 

Made from a medium grade rubber it has our 'Open Face Features'. It's spikes are inflated by the wearer with the use of a small tube on the back of the neck. Once inflated the tube can be sealed off with the use of a small metal plug, also making it easy to top up the air in the spikes should it be required. It has a 2 rear zips that runs from the top of the head down to the neck for entry and feels amazing comfortable when on, like all our hoods it design and cut allows for a good fit to contour the face.

 

 

Available in various sizes and colours.

 

Another unique creation to our hoods and inflatables collection is d.vote's freaky and very pervy S10 Inflatable Mohawk Style Hood.

 

Made from a medium grade rubber it has the S10 British Respirator Gas Mask for it face, giving it a spooky perverted alien look about it. It's spikes are inflated by the wearer with the use of a small tube that runs from the top inside the hood and sits neatly between the eye piece's making it easy to reach by the mouth. Once inflated the tube can be sealed off with the use of a small metal plug, also making it easy from inside to top up the air in the spikes should it be required. It has a side zip that runs from the top of the head down to the neck. It also has a second small tube inside adjacent to the right hand side air intake for breathing.

 

Once inside this hood with the air inflated into the spikes it adds some pressure around the ears allowing it to also become a sensory hood maybe for the playroom too.

 

Available in various sizes.

Exclusive to D.vote and one of our best seller's, this hood is the pride of our hood collection.

 

A total sensory deprivation hood with double skinned features, makes this is a very serious player's hood.

  

This double skinned hood is inspired by the carnivorous flower of the same name. The inner hood is made of a medium grade rubber and is attached to the outer skin at the collar. It looks innocent and petal-like enough at first, until the outer skin is zipped up and the victim is ensnared, then it takes on a very different edge for both parties!

 

It features open eye, mouth and nostrils holes on the first inner hood. The outer skin of the hood features 2 breathing tubes and 4 double skinned zip closing panels. With an option to choose the contrast colour for the inside panels of the outer skin, or even just all black.

 

Exclusive to D.vote all of our hoods come in 4 sizes for a better fit. We have spent many hours perfecting our unique design and fit.

 

Pictured here in various stages of closure and with a contrast colour of silver for the inside panels, as an example.

This is our basic design hood with open eye and mouth features, with nostril holes. Made in a medium grade rubber, with a rear zip and zip guard to prevent trapping hair.

 

You can chose to have a rear lacing* at the back over the zip for an even tighter feeling. You can also add from a choice of our collars with this hood.

 

Exclusive to D.vote, all of our hoods come in 4 sizes for a better fit. We have spent many hours perfecting our unique design and fit.

 

Main picture shows hood complete with our 3 'D' Ring Bondage Collar, as well as with the rear lacing option, as an example.

 

From our basic design hood with its 5 panels, this hood has zip eye and mouth features, with nostril holes. Made in a medium grade rubber, with a rear zip and zip guard to prevent trapping hair.

 

You can chose to add rear lacing* at the back over the zip for an even tighter feeling. Also choose to add from one any of our collars, to the complement the hood.

 

Exclusive to D.vote, all of our hoods come in 4 sizes for a better fit. We have spent many hours perfecting our unique design and fit.

 

Pictured here with none of the options added to hood.

 

A fabulous addition to our collection of hoods. It comprises of two 'skins' that once put on is inflated giving a similar sensation to that of being under-water. The hood can be inflated to an approximate circumference of 50" for a height of 14".

 

Made in a medium grade rubber, this hood features a breathing tube at mouth level inside the hood which is concealed between the skins and comes out at the top. It has a short zip at the back and features a 3 'D' ring collar. It is inflated via a rubber tube, which can be tied up in a 'slip knot' so it can be deflated and removed quickly.

 

This hood comes in one size that should fit all and is pictured here in it's fully inflated stage.

Another great hood in our collection is the Deprivation Hood. Made in a heavy grade rubber with a rear zip and zip guard to prevent trapping hair.

 

The hood has open eyes and mouth features, as well as with nostril holes. But it also comes with a detachable rubber gag and blindfold, which have adjustable straps with press studs. Finished off with our 3 'D' Ring Bondage Collar. All combined together, this hood allows for a total head coverage experience.

 

Main picture shows all features of the hood, with the removable blindfold and the gag in place, but with gag shown reversed out rather than in the mouth. The gag can be used either way if you choose. Both the blindfold and the gag can also be used separately from the hood itself.

 

Exclusive to D.vote, all of our hoods come in 4 sizes for a better fit. We have spent many hours perfecting our unique design and fit.

This hood speaks for itself !

 

The hood is made in a heavy grade rubber, allowing for a more extreme experience for the wearer, as well as visibly to the onlooker. It has a rear zip and zip guard to prevent trapping hair.

 

It has our open mouth and eyes features, but also comes with 2 detachable 'Pin Prick' eye discs, with press studs, which if used, they can give the wearer a more restricted view. Attached to the nostril holes, for breathing are 2 rubber tubes. It also comes with our adjustable 3 'D' Ring Bondage Collar, along with rear lacing* at the back over the zip, so allowing for an even tighter and more intense feeling for the wearer.

 

Giving our  'Drain Hood' its crowning ‘glory’ is the 'Stainless Steel Funnel' attached to a clear plastic tube, connected to an internal rubber mouth gag. The Funnel is held in place at the top of the hood with the use of a small rubber strap on simple black press studs. Both the funnel and the gag features of the hood, can also be removed if required. With all these features and some imagination, this hood offers for interesting experiences or even just a pleasurably an intense sensation.

 

Exclusive to D.vote, all of our hoods come in 4 sizes for a better fit. We have spent many hours perfecting our unique design and fit.

 

 

From our basic design hood with its 5 panels, this hood features ‘Pin Prick’ eyes and an open mouth, with nostril holes. Made in a medium grade rubber, with a rear zip and zip guard to prevent trapping hair.

 

You can chose to have a rear lacing* at the back over the zip for an even tighter feeling. You can also choose to add from one of our collars to this hood.

 

Exclusive to D.vote, all of our hoods come in 4 sizes for a better fit. We have spent many hours perfecting our unique design and fit.

 

Main picture of hood shown with the added option of our 'Plain Collar', as an example.

 

This hood is made in medium grade rubber, it has no eye holes, so is a complete 'blackout' when worn. It has a 'balloon' feature on front attached to the mouth via a small tube. Attached to the nostril holes, are two black tubes for breathing.

 

You can chose to add rear lacing* at the back over the zip for an even tighter feeling. Also choose to add from any of our collars to the hood.

 

Exclusive to D.vote, all of our hoods come in 4 sizes for a better fit. We have spent many hours perfecting our unique design and fit.

 

Another unique addition to our hoods collection is the Respirator Hood. Made in a medium grade rubber and combined with a British Army Gas Mask, becomes a more serious looking piece of head gear which speaks for itself. With a rear zip and guard at the back to stop hair getting trapped.

 

A black corrugated breathing tube which attaches to one of the gas masks breathing holes can be added as an option.

 

With the hood you can also add one of our collars and add rear back lacing* over the zip for a tighter feeling and fit.

 

Exclusive to D.vote, all of our hoods come in 4 sizes for a better fit. We have spent many hours perfecting our unique design and fit.